How to Strip Wire with Pliers?
Whether you are rewiring your old home electronics or installing a new doorbell, the first step you will go through is to strip those sheathing wires .
There are typically many tools to strip the wires effortlessly, like the wire strippers, wire cutters, crimpers, and pliers. But when it comes to reliability, you don’t have to spend that much on the separate wire cutters. You are simply better off with the pliers, too, which are handy tools found reliably in every home.
With a bit of knowledge and techniques, you can use the pliers to cut the wires or strip them, and this article deals with how to strip wires with pliers, so let us hop into the details!
Pliers specifically for Stripping Wires:
Pliers are very similar to those of the scissors because they have two levers joined together at the fulcrum or pivot. However, the only difference is that they have jaws instead of blades.
First of all, lets us deal with the types of pliers that can do the task of cutting the wires or stripping them effortlessly. It might require a bit of experience to strip the wires safely for beginners, but eventually, you can do the task effortlessly with the right tools.
“In case you are interested in more pliers as an HVAC technician, you can go to the Besthvactools.com.”
“You can also get the best of pliers made for HVAC technician through the link.”
However, pliers serve the nearly same purpose; there are a wide variety of them available for a specific purpose only like;
These are simply the hacks when coming to stripping the wires with a pair of pliers. Wire stripping pliers are explicitly made to strip the wires or cut them; they can even make proper edges for you to use wires afterward effortlessly.
They come with individual adjustments for cutting the wire or merely sheathing them, but the main question remains unanswered, can they work for other purposes? No, they are made for wire stripping and cutting, not for additional functionalities.
Combinational Pliers (Linesman’s):
You can use these pliers to do some electrical work. You can also do other stuff with these pliers, but they specialize in electrical operations only. Because of their multi-purpose usage, combinational pliers are considered one of the most famous pliers in any homeowner or professional toolbox.
Aside from all these, they hold the round figured objects, like the bolts and nuts. It also has a double cutter near its joint, ideal for cutting threaded bolts and wires.
“Interested in the usage of channel lock pliers? You can check the article what are channel lock pliers used for.”
This type of pliers comes with a relatively sharp edge. These sharp edges are best known for cutting electronic equipment like wires and screws or nails.
They are also termed as the micro pliers and have a very narrow or small jaw to effortlessly cut through the delicate electronic equipment or the circuit board. They even serve as cutting on delicate jewelry wires.
Flat Nose Pliers:
These pliers have larger, rectangular, and even flat jaws used in holding or bending the wires. Aside from this, the larger surface area allows you to grip objects and skin those wires effortlessly.
“To get more insight on the usage of pliers or their types, you can check the article on what are pliers used for.”
Now, we have the usage of pliers when dealing with the wires aside; we can go for the steps that deal with the stripping of wires with pliers;
Steps for Stripping wires with pliers:
So, the whole process of stripping the wires with the pliers is a technique that requires more practice and experience. It will be effortless for a relatively simple homeowner to stick with the proper tools like the wire strippers or wire cutters.
At that point, you don’t need to go for the expensive fifty-dollar mark; a simple ten-dollar stripper will do just fine.
But this article is on how to strip wires with pliers, right? If you are dead set on stripping the wires with a pair of pliers, then it all falls on the pressure control.
The primary thing you will require is the Lineman’s pliers or the pliers mentioned above, like the cutter pliers that come along with sharp jaws. So, let’s go for the steps.
- The primary thing you will have to do is ring the sheathing without cutting deep into the wire’s core.
- Then place the wire into the portion of the plier, which is made specifically for cutting.
- Then, gently squeeze and rotate the handheld plier around the wire itself. Remember, it is all about pressure control.
- Now, it’s time to grab a firm hold on the sheathing of wire with the specific gripping portion made in pliers. The part is separated from the rest of the wire sheathing.
- It’s time to pull the sheathing off from the core of the wire. Keep in mind that the pressure should be every minute at this point because the sheathing has been taken off from the rest of the core.
- In case you don’t get the hang of these steps, they practice for some time until you are sure to do it without fail.
It is essential to have the safety guidelines in mind because when you are in professional work, the open wire can cause harm to you or the place.
Secondly, if you completely chop off the wire, you can surely use the other part of the wire to create a new open wire ending, but it will shorten the wire. In professional scenarios, this is an issue.
Lastly, when you want to use the pliers for cutting, make sure to have the correct pair of pliers with an insulated grip and safe materials. Because when messing with the electrical equipment, the electricity can be conducted across the plier manufacturing material and into the grip. Safety equipment is a must, but if you are at a tight spot and cannot have hand grips on, this can be harmful to your life. So, make sure to get the correct pair of pliers with the right grip for the task.